เครื่องอัดขึ้นรูปยางและพลาสติก (Manual ASTM Press for Testing Specimens of Plastics, Elastomers and Other Thermoplastic Materials) ยี่ห้อ Carver (SIT58)

Model 12-12H-ASTM Catalog #4391-ASTM

The Manual ASTM Model 12-12H-ASTM (catalog# 4391) was designed to perform the ASTM compression molding of test plaques or bar specimens of Type I, II, III, IV or V polyethylene and other thermoplastic resins. The procedure is in conformance with ASTM Method D 4703 Procedure C (formerly D1928, Procedure C). This compression molding press is equipped with heating and manually water cooled platens and a programmable digital controller which has a heating/cooling loop for each platen and built-in program for the required 15°/minute ±2°C cooling rate.

• Clamping force 12 tons
• Adjustable Daylight 0″ – 10″ (Factory set at 4-½”)
• Stroke 5-1/8”
• Four (4) fully threaded columns
• Two (2) 12” x 12” electrically heated steel platens cored for ASTM water cooling, Temperature range up to 343ºC, sized for 8 ºC/minute temperature rise, Platen & perimeter insulation, Programmed platen cooling per ASTM D-4703 Procedure C (formerly D1928 procedure C), Package includes platens designed for flood cooling, inlet and outlet manifolds and valves for platens, programmable temperature controllers with ramp capability, One digital temperature controller per platen
• 0-24,000 lb analog pressure gauge (in 200 lb increments)
• 230V 1-Ph supply voltage
• Electrical disconnect (non-fused)
• Dimensions: 32 ”L-R x 29”F-B x 53”H (uncrated)
• Weight: 770 pounds (uncrated)

• Floor stand 19″L-R x 19″F-B x 30″H Wt 125# (catalog #223171D)
• Floor stand 36″L-R x 26″F-B x 30″H W/6″ Casters Wt 260# (catalog #223215C)
• 12 ton hydraulic unit repair kit (catalog #3729)
• Carver Special Hydraulic Fluid (Oil) (part #2170)
• Two gauge manifold (catalog #2096CE)
• Additional gauge choice for two gauge manifold (each)
  • 0 – 500 Lb. gauge, 250 Kg, 5 lb increments (catalog #381042)
  • 0 – 1,000 Lb. gauge, 450 Kg, 10 lb increments (catalog #381001)
  • 0 – 2,000 Lb. gauge, 900 Kg, 20 lb increments (catalog #381002)
  • 0 – 5,000 Lb. gauge, 2250 Kg, 50 lb increments (catalog #381003)
  • 0 – 10,000 Lb. gauge, 4500 Kg, 100 lb increments (catalog #381004)
• Digital Gauge (catalog# 6306.BN23 100 lb or 6306.BN22 10 lb)
  • Easy read LCD Round Gauge Face
  • Stem Mounted for Manual Presses only
  • Battery powered
  • Readings generate in 100 or 10 pound increments on 24,000 pound gauge
  • Approx. accuracy: +/-1% of reading between 1,000 lbs & 24,000 lbs force

NOTE: To run material class 1 thru 4 requires a constant water supply of 13 deg. C (55 deg. F.) To run class 5 material, a constant water supply of 8 deg. C (45 deg. F) is necessary. Water and air cooled chillers for providing the proper process water are available as an option.