เครื่องตัดละเอียดสำหรับห้องปฏิบัติการโลหะวิทยา (High Precision Automatic 2 axes Cutting Machine Ø 230 mm) สามารถใช้ใบตัดขนาดสูงสุดถึง 230 มิลลิเมตร | เครื่องตัดอัตโนมัติ 2 แกนความแม่นยำสูง, เครื่องตัด CNC 2 แกนความแม่นยำสูง, เครื่องตัดโลหะอัตโนมัติ 2 แกนความแม่นยำสูง, เครื่องตัดอะคริลิกอัตโนมัติ 2 แกนความแม่นยำสูง, เครื่องตัดพลาสติกอัตโนมัติ 2 แกนความแม่นยำสูง, เครื่องตัดอัตโนมัติแกนหมุนความแม่นยำสูง, เครื่องตัดอัตโนมัติความเร็วสูงความแม่นยำสูง, เครื่องตัดอัตโนมัติแม่นยำสูงสำหรับอุตสาหกรรม, Lam Plan, SIT188
84 orders in the last 30 days.
CUTLAM®micro 3.0
It’s designed for laboratories looking for an automatic machine adapted to high precision, long and difficult cuts.
This benchtop designed cutting machine offers astonishing
capacities. Thanks to the multiple motion table, the cutting wheel, and the feed speed control system according to the
cutting torque, this machine will overcome any difficult task.
Large capacity compact cutting machineIt is fitted with a large: 320 x 540 mm chamber, and equipped with a grooved aluminium table, sized 210 x 210 mm, and stainless steel interchangeable pallets. The large capacity of the CUTLAM®micro 3.0 relies on the use of 230 mm cut-off wheel, combined with a vertical movement range of 100 mm (Z axis) and a longitudinal range of 270 mm (Y axis). |
PrecisionThe positioning of the axes, which can be seen on the screen is 0,01 mm accurate and feed speed while cutting can be set from 0,1 to 20 mm/sec or 0,1 to 10 mm/sec. The use of the “smart motion” (read the following page about this device) will automatically reduce the moving of the axes in order to obtain a minimum value of 0,02 mm/sec. |
User-friendly interfaceA large touch-screen allows you to select the different functions using an easy to use, intuitive interface. All the positioning and cutting parameters can continuously be visible on the screen. The use of a joystick allows a fast positioning of the cut-off wheel; while in automatic and semi-automatic modes, an estimation of the remaining cutting time appears. Three cutting modes are available: manual, semi-automatic and automatic. |
Efficiency: 5 key points for higher productivity:1. Powerful motor of 1,1 kW.
4. Optional cross-feed table (X axis) manual or motorised for repetitive parallel cuts. |
Technical data CUTLAM®micro 3.0 |
|
|---|---|
| Wheel ∅ | 75 to 230 mm |
| Shaft ∅ | 12.7 mm |
| Standard flanges ∅ | 75 mm |
| Pressure under the wheel | 70 mm (with a ∅ 230 mm wheel) |
| Max cutting capacity | ∅ 77 mm (with a ∅ 230 mm wheel) |
| Vertical movement | Z axis 55 mm manual or 50 mm motorized (optional) |
| Lubrication/Lubrication | Decantation tank, 2 chambers, Input 100 µm filter, Pump 800 L/hour driven by the machine. |
| Motor power | 1.1 kW |
| Rotational sppeed | Variable, from 1000 to 4000 rpm |
| Cutting modes | Manual, semi-automatic, automatic |
| Feed speed control | 0,1 to 20 mm/sec. programmable Automatic control of speed / power continuous or sequentia |
| Lightening | LED |
| Protection | Transparent cover with locking system |
| Touch screen 3.5″ | Intuitive and graphic interface |
| Voltage | 230 V – 50 Hz single phase |
| Dimension (WxHxD) | 620 x 470 x 750 mm (H cover open: 812 mm) |
| Weight | 80 kg |
| Reference | 60 CTM30 00 |
Technical characteristics and equipment |
|
|
Theoretical cutting capacity
|
|
Options |
|
| Manual cross-feed table (X axis) to cut parallel sections stroke 55 mm accurate to 0,01 mm | 60 CTM31 20 |
| Motorised cross feed table (X axis) to cut parallel sections stroke 50 mm, accurate to 0,01 mm | 60 CTM34 00 |
| Positioning laser | 60 CTM35 00 |
Downloads
|
|
สินค้าที่เกี่ยวข้อง
Specimen Preparation Machine
เครื่องเจาะแบบอัตโนมัติ (Automatic Hollow Die Punch) ยี่ห้อ INSTRON (SIT388)
Laboratory Plastic Processing Machine
