ตะแกรงทดสอบ (Test sieve), ตะแกรงสแตนเลส (Stainless steel sieve), ตะแกรงมาตรฐาน ISO (ISO standard sieve), ตะแกรงมาตรฐาน ISO 3310 (ISO 3310 standard sieve), ตะแกรงคุณภาพสูง (High quality sieve), ตะแกรงสอบเทียบ (Calibrated sieve), Haver & Boecker (ผู้ผลิตผ้าตะแกรง), วิเคราะห์ขนาดอนุภาค (Particle size analysis), ควบคุมคุณภาพ (Quality control), วิจัยและพัฒนา (Research and development), อุตสาหกรรมยา (Pharmaceutical industry), อุตสาหกรรมอาหาร (Food industry), อุตสาหกรรมวัสดุก่อสร้าง (Construction industry), การกรองแห้ง (Dry sieving), การกรองเปียก (Wet sieving), การร่อน (Sieving), Nexopart Ro-Tap RX-812, W.S. Tyler, ตะแกรงสแตนเลสสำหรับเครื่องเขย่าตะแกรง Ro-Tap, ตะแกรงสอบเทียบมาตรฐาน ISO สำหรับวิเคราะห์ขนาดอนุภาค, Haver & Boecker test sieve for Ro-Tap RX-812, ตะแกรงสำหรับการกรองแห้งในอุตสาหกรรมยา, ตะแกรงทดสอบ Nexopart, ตะแกรงสแตนเลสคุณภาพสูง, ตะแกรงมาตรฐาน ISO, ตะแกรงสอบเทียบ, ตะแกรงสำหรับวิเคราะห์ขนาดอนุภาค, ตะแกรงสำหรับห้องปฏิบัติการ, ตะแกรงสำหรับอุตสาหกรรม, ตะแกรงผลิตจากเยอรมนี, ตะแกรงสำหรับกรองแห้ง, ตะแกรงสำหรับวิเคราะห์ผง, ตะแกรงสำหรับวิเคราะห์ดิน, ตะแกรงสำหรับวิเคราะห์อาหาร, ตะแกรงสำหรับควบคุมคุณภาพ, การสอบเทียบตะแกรง, การเลือกขนาดตาตะแกรง, การเตรียมตัวอย่างสำหรับการวิเคราะห์, ตะแกรงสแตนเลสคุณภาพสูงสำหรับวิเคราะห์ขนาดอนุภาค, วิธีเลือกขนาดตาตะแกรงที่เหมาะสมสำหรับการวิเคราะห์ผง, เลือกใช้ตะแกรงสอบเทียบเพื่อให้ได้ผลการวิเคราะห์ที่แม่นยำ, วิธีการสอบเทียบตะแกรงตามมาตรฐาน ISO, เปรียบเทียบตะแกรง Nexopart กับแบรนด์อื่นๆ, ตะแกรงสำหรับวิเคราะห์ขนาดอนุภาค (Sieve for particle size analysis), ตะแกรงสำหรับกรองแห้ง (Sieve for dry sieving), ตะแกรงสำหรับอุตสาหกรรม (Sieve for industry), ตะแกรงสำหรับห้องปฏิบัติการ (Sieve for laboratory), ตะแกรงขนาดต่างๆ (Sieve size), ตะแกรงรูเปิด (Sieve opening size), ผลิตตะแกรง (Sieve manufacturing), จำหน่ายตะแกรง (Sieve supplier), ซื้อตะแกรง (Buy sieve), ตะแกรงราคาถูก (Cheap sieve), ตะแกรงส่งเร็ว (Fast delivery sieve), เลเซอร์มาร์คกิ้ง (Laser marking), โค้ดข้อมูล (Data code), ตะแกรงซีล (Sealed sieve), การสอบเทียบตะแกรง (Sieve calibration), ตะแกรงสำหรับเครื่องเขย่า Ro-Tap (Sieve for Ro-Tap shaker), ชุดตะแกรง (Sieve set), อุปกรณ์เสริมสำหรับเครื่องเขย่าตะแกรง (Sieve shaker accessories), Test sieve, Sieve cloth, Sieve frame, Sieve analysis, Particle size analysis, Nexopart, SIT224
028867834-5
Applications | |
Application examples for test sieves with stainless steel frames | |
Our test sieves with frames made from stainless steel are suitable both for hand sieving as for dry and wet sieving with all our test sieve shakers. | |
Bulk material of different branches can be classified and separated with these test sieves. | |
• Industrial rocks and minerals • Food • Glass • Ceramic • Granulates • Powders • Fertilizer |
|
Please do not use alkaline cleaning liquids to clean HAVER test sieves, otherwise the durability and function of the adhesive seam is no longer guaranteed. We recommend the HAVER USC cleaning liquid “Mehrzweckreiniger S”. |
Information | |
Brochure HAVER Particle Analysis | |
2019 Analysensiebvergleichstabelle | |
That could interest you as well: | |
• Inspection documents according to EN 10204 | |
Type | Document contenct |
Declaration of compliance with the order 2.1 | Statement of compliance with the order. |
Inspection certificate 3.1 | Statement of compliance with the order, with indication of results of specific inspection. |
The free certificate of works 2.1 according to DIN EN 10204 supplied with test sieves basically certifies that the sieves are manufactured in compliance with the requirements for quality assurance according to ISO 9001. | |
On request we also issue acceptance test certificates 3.1 according to DIN EN 10204. For this a certification or calibration must be carried out. During calibration, three times more meshes are measured than during certification. The measurement results are stored and are available for later control measurements. | |
• Calibration certificate acc. to DIN EN ISO / IEC 17025 | |
Accredited calibration laboratory | |
Ever increasing tougher demands that go beyond the normal standards are now being placed on the reliability of test sieves in an increasing number of application areas. Haver & Boecker meets these demands and, since June 2013, has become Germany’s first accredited calibration laboratory for test sieves of metal wire cloth as to DIN EN ISO / IEC 17025. The calibration certificates for test sieves of metal wire cloth serve as proof of conformance to national and international standards and are recognised internationally by the signatory states within the scope of conventions (EA, ILAC, etc.). | |
DIN EN ISO/IEC 17025 | |
This standard contains all requirements to be met by testing and calibration laboratories to manage quality (min. According to DIN EN ISO 9001) and technically competent and able to generate technically valid results to prove. The calibration of test sieves with woven wire cloth according to DIN EN ISO / IEC 17025 expands the current review of test sieves with inspection certificate 3.1 according to EN 10204. The uncertainty mentioned in the calibration certificate is used in the subsequent use of the measuring instrument for correcting of the readings. | |
Requirements for competence in testing and calibration laboratories as to DIN EN ISO / IEC 17025 | |
• Assurance of expertise and competence • Quality management according at least to DIN EN ISO 9001 • Transparency of measurement results • Measurements under clean room conditions • Measurement results that are expertly based • Indication of measurement uncertainties • Traceability of used measurement devices to national / international standard |
|
Data Sheet Calibration laboratory | |
If you send us used test sieves, please note the following: | |
• The test sieves have to be cleaned by the customer. • QThe test sieves have to be free from any contaminations. • Please submit a declaration of no objection. |
Overview | |||||||||||||||||||||||||||
Test Sieves with stainless steel frames and openings from 5 micron | |||||||||||||||||||||||||||
Our test sieves with frames made from stainless steel are equipped with woven wire cloth or robust plates with square perforations according to DIN ISO 3310. If you emphazise closer tolerances our “Gold” Test Sieves are perfect. Test sieves with electroformed sheets are mainly used for finest materials with particle sizes from 5 micron. | |||||||||||||||||||||||||||
Conforming to international standards | |||||||||||||||||||||||||||
Fabricated according to valid standards: ISO 3310, ASTM E11, DIN ISO 3310, BS ISO 3310, ISO 5223 etc. |
|||||||||||||||||||||||||||
Your advantages at a glance | |||||||||||||||||||||||||||
• A particularly smooth surface of frames prevents cross-contamination. • An extremely stable sieve structure guarantees a long life. • The sieve fabric retains its tension exceedingly well even after intensive use. • Compatibility with equivalent test sieves manufactured in accordance with current standards. |
|||||||||||||||||||||||||||
Technical data | |||||||||||||||||||||||||||
We provide sieve media of electroformed sheets with aperture sizes from 5 micron up to 500 micron, sieve media of woven wire cloth with aperture sizes from 20 micron up to 125 mm and perforated plates made from galvanized steel* with openings from 4 mm up to 125 mm.
*Sieves with perforated plates made from galvanized steel have to be stored in a dry place and must be cleaned and dried after use. |
|||||||||||||||||||||||||||
|
Applications | |
Application examples for test sieves with stainless steel frames | |
Our test sieves with frames made from stainless steel are suitable both for hand sieving as for dry and wet sieving with all our test sieve shakers. | |
Bulk material of different branches can be classified and separated with these test sieves. | |
• Industrial rocks and minerals • Food • Glass • Ceramic • Granulates • Powders • Fertilizer |
|
Please do not use alkaline cleaning liquids to clean HAVER test sieves, otherwise the durability and function of the adhesive seam is no longer guaranteed. We recommend the HAVER USC cleaning liquid “Mehrzweckreiniger S”. |
Information | |
Brochure HAVER Particle Analysis | |
2019 Analysensiebvergleichstabelle | |
That could interest you as well: | |
• Inspection documents according to EN 10204 | |
Type | Document contenct |
Declaration of compliance with the order 2.1 | Statement of compliance with the order. |
Inspection certificate 3.1 | Statement of compliance with the order, with indication of results of specific inspection. |
The free certificate of works 2.1 according to DIN EN 10204 supplied with test sieves basically certifies that the sieves are manufactured in compliance with the requirements for quality assurance according to ISO 9001. | |
On request we also issue acceptance test certificates 3.1 according to DIN EN 10204. For this a certification or calibration must be carried out. During calibration, three times more meshes are measured than during certification. The measurement results are stored and are available for later control measurements. | |
• Calibration certificate acc. to DIN EN ISO / IEC 17025 | |
Accredited calibration laboratory | |
Ever increasing tougher demands that go beyond the normal standards are now being placed on the reliability of test sieves in an increasing number of application areas. Haver & Boecker meets these demands and, since June 2013, has become Germany’s first accredited calibration laboratory for test sieves of metal wire cloth as to DIN EN ISO / IEC 17025. The calibration certificates for test sieves of metal wire cloth serve as proof of conformance to national and international standards and are recognised internationally by the signatory states within the scope of conventions (EA, ILAC, etc.). | |
DIN EN ISO/IEC 17025 | |
This standard contains all requirements to be met by testing and calibration laboratories to manage quality (min. According to DIN EN ISO 9001) and technically competent and able to generate technically valid results to prove. The calibration of test sieves with woven wire cloth according to DIN EN ISO / IEC 17025 expands the current review of test sieves with inspection certificate 3.1 according to EN 10204. The uncertainty mentioned in the calibration certificate is used in the subsequent use of the measuring instrument for correcting of the readings. | |
Requirements for competence in testing and calibration laboratories as to DIN EN ISO / IEC 17025 | |
• Assurance of expertise and competence • Quality management according at least to DIN EN ISO 9001 • Transparency of measurement results • Measurements under clean room conditions • Measurement results that are expertly based • Indication of measurement uncertainties • Traceability of used measurement devices to national / international standard |
|
Data Sheet Calibration laboratory | |
If you send us used test sieves, please note the following: | |
• The test sieves have to be cleaned by the customer. • QThe test sieves have to be free from any contaminations. • Please submit a declaration of no objection. |
Overview | |
Test Sieves with stainless steel frames and openings from 5 micron | |
Our test sieves with frames made from stainless steel are equipped with woven wire cloth or robust plates with square perforations according to DIN ISO 3310. If you emphazise closer tolerances our “Gold” Test Sieves are perfect. Test sieves with electroformed sheets are mainly used for finest materials with particle sizes from 5 micron. | |
Conforming to international standards | |
Fabricated according to valid standards: ISO 3310, ASTM E11, DIN ISO 3310, BS ISO 3310, ISO 5223 etc. |
|
Your advantages at a glance | |
• A particularly smooth surface of frames prevents cross-contamination. • An extremely stable sieve structure guarantees a long life. • The sieve fabric retains its tension exceedingly well even after intensive use. • Compatibility with equivalent test sieves manufactured in accordance with current standards. |
|
Technical data | |
We provide sieve media of electroformed sheets with aperture sizes from 5 micron up to 500 micron, sieve media of woven wire cloth with aperture sizes from 20 micron up to 125 mm and perforated plates made from galvanized steel* with openings from 4 mm up to 125 mm.
*Sieves with perforated plates made from galvanized steel have to be stored in a dry place and must be cleaned and dried after use. |
Applications | |
Application examples for test sieves with stainless steel frames | |
Our test sieves with frames made from stainless steel are suitable both for hand sieving as for dry and wet sieving with all our test sieve shakers. | |
Bulk material of different branches can be classified and separated with these test sieves. | |
• Industrial rocks and minerals • Food • Glass • Ceramic • Granulates • Powders • Fertilizer |
|
Please do not use alkaline cleaning liquids to clean HAVER test sieves, otherwise the durability and function of the adhesive seam is no longer guaranteed. We recommend the HAVER USC cleaning liquid “Mehrzweckreiniger S”. |
Information | |
Brochure HAVER Particle Analysis | |
2019 Analysensiebvergleichstabelle | |
That could interest you as well: | |
• Inspection documents according to EN 10204 | |
Type | Document contenct |
Declaration of compliance with the order 2.1 | Statement of compliance with the order. |
Inspection certificate 3.1 | Statement of compliance with the order, with indication of results of specific inspection. |
The free certificate of works 2.1 according to DIN EN 10204 supplied with test sieves basically certifies that the sieves are manufactured in compliance with the requirements for quality assurance according to ISO 9001. | |
On request we also issue acceptance test certificates 3.1 according to DIN EN 10204. For this a certification or calibration must be carried out. During calibration, three times more meshes are measured than during certification. The measurement results are stored and are available for later control measurements. | |
• Calibration certificate acc. to DIN EN ISO / IEC 17025 | |
Accredited calibration laboratory | |
Ever increasing tougher demands that go beyond the normal standards are now being placed on the reliability of test sieves in an increasing number of application areas. Haver & Boecker meets these demands and, since June 2013, has become Germany’s first accredited calibration laboratory for test sieves of metal wire cloth as to DIN EN ISO / IEC 17025. The calibration certificates for test sieves of metal wire cloth serve as proof of conformance to national and international standards and are recognised internationally by the signatory states within the scope of conventions (EA, ILAC, etc.). | |
DIN EN ISO/IEC 17025 | |
This standard contains all requirements to be met by testing and calibration laboratories to manage quality (min. According to DIN EN ISO 9001) and technically competent and able to generate technically valid results to prove. The calibration of test sieves with woven wire cloth according to DIN EN ISO / IEC 17025 expands the current review of test sieves with inspection certificate 3.1 according to EN 10204. The uncertainty mentioned in the calibration certificate is used in the subsequent use of the measuring instrument for correcting of the readings. | |
Requirements for competence in testing and calibration laboratories as to DIN EN ISO / IEC 17025 | |
• Assurance of expertise and competence • Quality management according at least to DIN EN ISO 9001 • Transparency of measurement results • Measurements under clean room conditions • Measurement results that are expertly based • Indication of measurement uncertainties • Traceability of used measurement devices to national / international standard |
|
Data Sheet Calibration laboratory | |
If you send us used test sieves, please note the following: | |
• The test sieves have to be cleaned by the customer. • QThe test sieves have to be free from any contaminations. • Please submit a declaration of no objection. |
สินค้าที่เกี่ยวข้อง
สินค้าพร้อมส่ง (In stock)
Test Sieves for ALPINE Air Jet Sieves รุ่นสำหรับ 20 ไมครอน (SIT222)
สินค้าพร้อมส่ง (In stock)
Accessories Test Sieves รุ่นสำหรับ การกรองแบบแห้งและแบบเปียก (SIT220)